1995 Grand Am motor

Tiny
LEASHIE
  • MEMBER
  • 1995 PONTIAC GRAND AM
I have a 1995 Pontiac Grand Am with the Quad 4 motor. The car recently had the water pump go out on it and of course the coolant got into the oil and created quite the mess. The water pump, head gasket, ect. Has been replaced. The motor is now making a ruckus that appears to be coming from the valve train and some of the lifters appeared to be plugged up. It was suggested to me by a mechanic that the oil passages could still be plugged up and there wasn't any oil getting up to the valves. Is there anything I can put into the crankcase like GUNK to unplug the passages or do I have to take it all apart?

Thanks
Do you
have the same problem?
Yes
No
Wednesday, July 12th, 2006 AT 1:07 PM

3 Replies

Tiny
HEADHUNTER
  • MEMBER
  • 22 POSTS
You should be able to do an engine flush.
Was this
answer
helpful?
Yes
No
Wednesday, July 12th, 2006 AT 11:02 PM
Tiny
LEASHIE
  • MEMBER
  • 2 POSTS
Do you think a couple of cans of GUNK would work or is there something a bit stronger that I can use? My husband and I just had the upper half apart and discovered that some of the lifters were gummed up with stuff too. It's an evil quad 4 motor. I'll take my 2.6 any day.
Was this
answer
helpful?
Yes
No
Thursday, July 13th, 2006 AT 7:34 AM
Tiny
HEADHUNTER
  • MEMBER
  • 22 POSTS
I dont know if gunk makes an egnige flush or not but if they do follow the directions on the container, and you may have to do it a couple of times.
Was this
answer
helpful?
Yes
No
Saturday, July 22nd, 2006 AT 9:50 AM

Please login or register to post a reply.

Sponsored links