SPONSORED LINKS

1996 Ford Taurus Missing?

Tiny
CHRIS_FAULKNER
  • MEMBER
  • 1996 FORD TAURUS
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 100,000 MILES
I'm working on my girlfriends car. It's a 3.0L 24v V6. It feels like the car's missing severly spark wise, so today I changed 4 of the 6 plugs. The reason being is because I spent 2 hours trying to get the intake manifold off. I removed the 6 8mm bolts on top and the 2 7mm bolts behind it, but it seems to still be bolted down or caught on something near the throttle body. I tried everything to change the last 2 plugs under the manifold but I can't seem to get to them without removing the manifold. Any suggestions?
SPONSORED LINKS
Friday, February 12th, 2010 AT 12:01 AM

1 Reply

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Mark and remove vacuum hoses and wiring harness connectors as necessary.
Disconnect throttle cable and speed control actuator from throttle body. Remove throttle cable bracket from intake manifold. Disconnect Exhaust Gas Recirculation (EGR) tube. Remove upper intake manifold retaining bolts
Remove upper intake manifold.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, February 12th, 2010 AT 6:29 AM

Please login or register to post a reply.

Related Intake Manifold Replace/Remove Content

Intake Manifold Replace
VIDEO
Intake Manifold Replace
Instructional repair video
Intake Manifold Replacement
GUIDE
Intake Manifold Replacement
When an intake gasket or intake manifold fails it can create a vacuum or coolant leak which will cause the engine to run poorly or overheat. This can happen over time, if...
VIEW MORE

Sponsored links