1965 Ford Mustang
I recently put a new engine in my '65 mustang (200 ci L6 3.3L). I put new spark plugs, new plug wires, new alternator, and a new coil. New fuel filter, new air filter, new gap in the distributor, and rebuilt the transmission myself (works beautifully now, C4). The car wasn't missing before I took the car in to my shop to rebuild the tranny, and when we started it up after we had finished with it, it was missing really bad. I pulled all the plug wires, blew off the dust, made sure it was idling okay, timed it, and then I noticed that the accelerator return spring wasn't holding the throttle all the way closed. Replaced the spring with a dual-spring throttle return, and it works better, but the carburetor linkage was a bit bent, so I fixed that and now it's closed. Sorry for the long history, I want to figure this out badly! I don't know why it's missing, and any direction to move in so that I can get it to stop missing would be great. Thanks!
April 5, 2006.
April 5, 2006.
I just bought a 2004 Ford Focus ZTS with a 2.3 Liter I4 PZEV motor - according to the Owners Guide. These engines seem to only have a air filter sensor instead of the option to replace...
9 answers • 1997 Ford Taurus • 140,000 miles
I recent had the air filter in my 2003 oldsmobile alero changed and now the car seems to***** when I put it into drive and on the first gear shift. The second gear shift is not as bad ...
2 answers • 2003 Oldsmobile Alero
How do you change the air filter on a Chevrolet Prizm
1 answer • 2001 Chevrolet Prizm • 109,000 miles