Can you help with PCV location

Tiny
CLDCHLN
  • MEMBER
  • 2005 FORD EXPEDITION
  • V8
  • 4WD
  • AUTOMATIC
  • 80,000 MILES
I am looking to put in an oil catch can pcv valve location please?
Wednesday, November 3rd, 2010 AT 2:47 PM

23 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Hi cldchln,

2005 Ford Expedition and 2007 F150 are similar.

Item # 6 is the PCV hose. The valve is plugged into the valve cover.


https://www.2carpros.com/forum/automotive_pictures/192750_IntakeManifold05ExpeditionFig01_1.jpg



2005 GMC Sierra 1500.

PCV hose is item # 716, (dirty air ) and # item # 700, (fresh air).


https://www.2carpros.com/forum/automotive_pictures/192750_IntakeManifold05Sierra53Fig11_1.jpg



2007 Toyota Tundra


https://www.2carpros.com/forum/automotive_pictures/192750_PCV07TundraFig109_1.jpg

Was this
answer
helpful?
Yes
No
-2
Sunday, November 7th, 2010 AT 3:36 AM
Tiny
KIMMY4400
  • MEMBER
  • 5 POSTS
  • 2004 FORD EXPEDITION
  • 172,000 MILES
Where is the pcv valve location in a 2004 4.6 ford expedition
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
In the valve cover rh side see pic
Was this
answer
helpful?
Yes
No
-1
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
KIMMY4400
  • MEMBER
  • 5 POSTS
Can you send me a pic of the pcv part that I need to purchase. Also I've looked everywhere trying find the location where I need to replace the valve doesn't look the same as the diagram in my vehicle. Is there another truck thats compared to the 2004 4.6 ford expedition has the same location
Was this
answer
helpful?
Yes
No
+1
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
KIMMY4400
  • MEMBER
  • 5 POSTS
Thanks for the information
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
I sesnt a diagram of where it was located. Check rock auto. Com for part
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See if these help you the pcv may unscrew for removal on LH side of engine (driver's side)
Was this
answer
helpful?
Yes
No
+1
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
KIMMY4400
  • MEMBER
  • 5 POSTS
Thanks again. Another question I have can you also send me a diagram of where my upstream oxygen sensors are located in my 2004/ 4.6 expedition
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
They are the ones between engine and converters on exaust system. See pic. Please repost a new question like this as a lot of times they are not answered
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
MELISSA1001
  • MEMBER
  • 1 POST
  • 2004 FORD EXPEDITION
  • 107,000 MILES
Is the valve located under the plastic cover or on the driver's side of the cover, just below? I asked the person at an automotive store but they were unsure of it's location. A picture would be helpful.
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
The PCV valve is located in the upper portion of the valve cover. Here is a diagram of the 4.6L or 5.4L engines below.
Was this
answer
helpful?
Yes
No
+4
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
KIMMY4400
  • MEMBER
  • 5 POSTS
Thanks so much I appreciate your help. The second diagram was a lot more accurate
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
BIGLEE33
  • MEMBER
  • 3 POSTS
  • 2003 FORD EXPEDITION
  • V8
  • 4WD
  • AUTOMATIC
  • 89,060 MILES
I would like to know exactly where my pcv tube is located and if it will be difficult to replace for the user.
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
What size engine do you have?
Was this
answer
helpful?
Yes
No
-1
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
BIGLEE33
  • MEMBER
  • 3 POSTS
I have the 4.6 Liter.
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
Here are the pictures I found. It is on the valve cover.


https://www.2carpros.com/forum/automotive_pictures/249084_PCV_1.jpg




https://www.2carpros.com/forum/automotive_pictures/249084_pcv_v_1.jpg



Let me know if this helps. NOTE: These pictures are from Ford, so I will assume they are correct.
Was this
answer
helpful?
Yes
No
+3
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
BIGLEE33
  • MEMBER
  • 3 POSTS
Thank you so much! I was just wondering about that very hose. I will let you know if it works out.
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
ELLIOTT37
  • MEMBER
  • 1 POST
  • 2003 FORD EXPEDITION
  • V8
  • 2WD
  • AUTOMATIC
  • 80,000 MILES
Bought a pcv vave and cannot find it on the engine
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,133 POSTS
Hi:
It's located on the valve cover. Here is a picture.


https://www.2carpros.com/forum/automotive_pictures/249084_pcv_2.jpg



Let me know if this helps.

Joe
Was this
answer
helpful?
Yes
No
-1
Thursday, September 12th, 2019 AT 2:43 PM (Merged)
Tiny
SABRUIN
  • MEMBER
  • 1 POST
  • 1999 FORD EXPEDITION
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 144,000 MILES
I was told by the service tech at the Ford dealership we take our vehicle to that the PCV tube is collapsed. Can you tell me where it is and how to replace it? A diagram or photo would be helpful. Thanks!
Was this
answer
helpful?
Yes
No
Thursday, September 12th, 2019 AT 2:43 PM (Merged)

Please login or register to post a reply.

Sponsored links