1989 Dodge Spirit ignition timing information for a 1989 do

Tiny
POOPIETIM
  • MEMBER
  • 1989 DODGE SPIRIT
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 190,000 MILES
1989 Dodge Spirit 2.5 turbo
I need to ignition timing information for said car. I have the HAYNES book for my car(30060) and it tells me to refer to the "vehicle emissions control information" label. Well, I looked, looked, and looked and its not there. I just need to kneed to know where the mark needs to be in reference to top dead center. Thanks.
Do you
have the same problem?
Yes
No
Wednesday, June 30th, 2010 AT 12:36 PM

3 Replies

Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS


https://www.2carpros.com/forum/automotive_pictures/261618_Graphic_594.jpg



https://www.2carpros.com/forum/automotive_pictures/261618_Graphic2_83.jpg

Was this
answer
helpful?
Yes
No
Wednesday, June 30th, 2010 AT 10:37 PM
Tiny
POOPIETIM
  • MEMBER
  • 2 POSTS
Now, when I attach the timing light and aflashing into the little window on the bell housing windoe where should the mark be?
Was this
answer
helpful?
Yes
No
+1
Thursday, July 1st, 2010 AT 4:45 AM
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
After you attached timing light to #1 cylinder you need to rotate teh lower crank pulley so that it has the timing marks called out on the crank pulley. Take the light and aim it at the timing marks. Light should strobe at the mark here, if not then its not in time.
Was this
answer
helpful?
Yes
No
Thursday, July 1st, 2010 AT 1:08 PM

Please login or register to post a reply.

Sponsored links