SPONSORED LINKS

1998 Dodge Ram wont start

Tiny
BOURQUINS
  • MEMBER
  • 1998 DODGE RAM
  • V8
  • 4WD
  • AUTOMATIC
  • 185,000 MILES
Had codes 300 301 306, multi missfire misfire cyl1 misfire cyl6 changed plugs, wires, cap, and rotor, reset codes havent came back on, but still no start, tried changing coil, still no fix, has aprox 52 psi fuel pressure even when craking only drops maybe a pound, rolled engine to TDC and rotor was pointing at no1, im lost, can anyone please help?
SPONSORED LINKS
Thursday, November 12th, 2009 AT 4:31 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Do below

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine -have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem, check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, November 12th, 2009 AT 7:34 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting - Top 3 Easy Steps
GUIDE
Engine Not Starting - Top 3 Easy Steps
Over the past 20 years on 2CarPros we have identified the top three problems that are easily fixed. This can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links