1999 Dodge Durango serpentine belt

1999 DODGE DURANGO
129,000 MILES • V8 • 4WD • AUTOMATIC
Avatar
TATFREAKS
  • MEMBER
  • 2 POSTS
one of my pully wheels on my block had the bearing housing sheared off i would like to know what the proper name for that wheel is???


it is the center wheel on the top it looks like it is bolted straight onto the aluminum cast arm that the alt. is bolted to
Dec 25, 2008 at 8:21 PM
Advertisement
Avatar
OBXAUTOMEDIC
  • CAR REPAIR CONTRIBUTOR
  • 3,711 POSTS
[quote:dca3c29ea2="tatfreaks"]Drive Train Axles Bearings problem
1999 Dodge Durango V8 Four Wheel Drive Automatic 129000 miles

one of my pully wheels on my block had the bearing housing sheared off i would like to know what the proper name for that wheel is???


it is the center wheel on the top it looks like it is bolted straight onto the aluminum cast arm that the alt. is bolted to[/quote:dca3c29ea2]

Hello,

I believe you are describing the Tensioner, but check out this link and look through the page for your belt diagram....

https://www.2carpros.com/car_repair_information/tec_info/1999/dodge/durango/1999_dodge_durango_drive_belt_routing_diagram.htm

.
Dec 25, 2008 at 9:17 PM
Avatar
TATFREAKS
  • MEMBER
  • 2 POSTS
Thank you very much for the diagram page i could not find one all last night it is my idler pulley i am now on my way to pick it up for under $25 thank you again merry christmas to you and yours
Dec 26, 2008 at 11:32 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.