1993 Chevy S-10 Fuel System

Tiny
GK
  • MEMBER
  • 1993 CHEVROLET S-10
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 167,000 MILES
I have a Blazer that's been sitting up for at least 2 years. It has a 4.3 CPI (W). I've changed the fuel pump and filter, drained the bad gas. What I need to know is how to clean the rest of the fuel system?
It will run only if I pour gas in the intake. The person that had it before me said that it just quit running as he was driving. So he set it up and bought another vehicle.
Saturday, February 23rd, 2008 AT 10:43 PM

1 Reply

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Does the fuel pump run? Do you have good pressure at the engine. If so it may not have injector pulse. There is a 2 wire plug at the front d/s of the intake manifold that goes intot eh upper plenum. Use a test light to see if it has power on one side and the other side should flash when engine is cranked.
Was this
answer
helpful?
Yes
No
Monday, February 25th, 2008 AT 7:48 AM

Please login or register to post a reply.

Sponsored links