SPONSORED LINKS

2011 Ford Mustang Throttle body control system

Tiny
JESSEMADRIDJR5
  • MEMBER
  • 2011 FORD MUSTANG
  • V6
Will start and run just fine, will shut down and stop accelerating randomly while driving and a wrench light will pop up
Tuesday, June 23rd, 2015 AT 1:57 PM

3 Replies

Tiny
RACEFAN966
  • MECHANIC
  • 5,029 POSTS
Have you checked for codes? If not please do and let me know what you find ok.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, June 24th, 2015 AT 7:23 AM
Tiny
JESSEMADRIDJR5
  • MEMBER
  • 2 POSTS
P2111
Was this
answer
helpful?
Yes
No
Wednesday, June 24th, 2015 AT 7:25 AM
Tiny
RACEFAN966
  • MECHANIC
  • 5,029 POSTS
If you haven't already figured it out the code is for the throttle body. Now what have you checked already? Check for carbon build up around the throttle plate, check the wiring for any issues and if you would unplug and check for any corrosion and plug it back in. Do you have a digital multi meter to do some pin testing and are you comfortable with doing that. Get back to me and we will go from there
Was this
answer
helpful?
Yes
No
Thursday, June 25th, 2015 AT 7:03 AM

Please login or register to post a reply.

Related Throttle Body Content

Service a Throttle Body Housing Ford
VIDEO
Service a Throttle Body Housing Ford
Instructional repair video
Throttle Actuator Bore Service
GUIDE
Throttle Actuator Bore Service
The throttle bore or throttle actuator as they are called on newer cars is used to meter the engine air intake thus controlling the engine RPM and power output via the gas...
VIEW MORE

Sponsored links