It is grinding from the rear?

Tiny
JREGZ
  • MEMBER
  • 2014 DODGE CHARGER
  • 5.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 55,000 MILES
I got in my car, started it up, released the parking brake, and put the car into reverse. It is grinding from the rear I need new brake can you help me please?
Do you
have the same problem?
Yes
No
Friday, March 27th, 2020 AT 12:46 PM

13 Replies

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Here are some guides that will help with this:

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

https://www.youtube.com/watch?v=GwU7nfBaRr0

https://www.youtube.com/watch?v=j8YwfSKEzZo&t=29s

Please let us know what questions you have but below is the process from the manual on how to replace the rear brakes. Thanks
Was this
answer
helpful?
Yes
No
Saturday, April 24th, 2021 AT 10:44 AM
Tiny
BWHITEHAIR
  • MEMBER
  • 3 POSTS
  • 2008 DODGE CHARGER
  • 55,000 MILES
Ive changed brakes before, but not on this car. I see they come with a hardware kit, but seems old hardware is hard to get out. Any Suggestions?
Was this
answer
helpful?
Yes
No
Tuesday, May 11th, 2021 AT 1:24 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Should not be any different with others.
What hardware kit are you refering to?

1. Remove Upper caliper guide pin bolt (1). To do so, hold the guide pin (3) stationary while turning bolt.

2. Rotate caliper downward (5), exposing brake pads (2 and 3).
Use care not to overextend brake hose when doing this or damage may occur.

3. Remove inboard (2) and outboard (3) brake pads from caliper adapter (4).

Note : In some cases, it may be necessary to retract caliper piston in its bore a small amount in order to provide sufficient clearance between shoes and rotor to easily remove caliper from knuckle. This can usually be accomplished before guide pin bolts are removed by
grasping rear of caliper and pulling outward working with guide pins, thus retracting piston. Never push on piston directly as it may get damaged.
Was this
answer
helpful?
Yes
No
Tuesday, May 11th, 2021 AT 1:24 PM (Merged)
Tiny
BWHITEHAIR
  • MEMBER
  • 3 POSTS
Ok thank you much. Will try it out. The hardware kit are the anti squeel shims. Autozone. Com is saying these are required
Was this
answer
helpful?
Yes
No
-1
Tuesday, May 11th, 2021 AT 1:24 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Yes, shims do rust out and it is necessary to have them to eliminate squealing and groaning noises when brakes are applied.

Hope everything works out great.

Have a nice day.
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 11th, 2021 AT 1:24 PM (Merged)
Tiny
OLANDRIA
  • MEMBER
  • 1 POST
  • 2009 DODGE CHARGER
  • 3.5L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 93,057 MILES
I have had a problem with replacing the rear brakes, Can someone please help me?
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:41 PM (Merged)
Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Here is a guide that will help with step by step instructions on how to do this:

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

Also, here is a guide on how to retract the rear pistons:

https://www.youtube.com/watch?v=j8YwfSKEzZo&t=29s

Below is the info from the manual that will help with this. Please run through this material and let us know if you have other questions. Thanks
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:41 PM (Merged)
Tiny
CARGIRL77
  • MEMBER
  • 1 POST
  • 2007 DODGE CHARGER
  • 3.5L
  • V6
  • 2WD
  • AUTOMATIC
  • 156,000 MILES
I think I need to replace the rear brakes. Thank you in advance. Mindy
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:41 PM (Merged)
Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Here are a few guides that will help with step by step instructions. Please review this and the material below.

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

Also, here is a guide on how to retract the rear pistons:

https://www.youtube.com/watch?v=j8YwfSKEzZo&t=29s

Below you will find the process from the manual that will give additional details. Please run through all this material and let us know if you have any questions. Thanks
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:42 PM (Merged)
Tiny
AMBROJSHIA
  • MEMBER
  • 1 POST
  • 2007 DODGE CHARGER
  • 3.5L
  • V6
  • 4WD
  • 150,000 MILES
At first I was driving and I hear a little noise from the rear but not the brakes are grinding can you help me please? Tia
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:42 PM (Merged)
Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Sounds like you do need rear brakes. here is a guide that will help with step by step instructions:

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

Also, here is a guide on how to retract the rear pistons:

https://www.youtube.com/watch?v=j8YwfSKEzZo&t=29s

Below is the process from the manual that will help with this. Please let us know if you have any questions. Thanks
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:42 PM (Merged)
Tiny
MIRANDANUNLEY
  • MEMBER
  • 1 POST
  • 2006 DODGE CHARGER
  • 166,000 MILES
. Last week (first morning that it was below freezing this year) when I went out to drive the car and I heard the rear brake grinding.
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:42 PM (Merged)
Tiny
DANNY L
  • MECHANIC
  • 5,648 POSTS
Hello, I'm Danny.

Here is the information you requested. Here is a tutorial showing how to replace rear rear brake pads and rotors:

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

Here is a YouTube video from our site showing how to retract the rear caliper piston when replacing rear brake pads:

https://youtu.be/j8YwfSKEzZo

I've attached picture steps below on how to change the rear brake pads and rotors on your car. Hope this helps and thanks for using 2CarPros.
Was this
answer
helpful?
Yes
No
Monday, June 28th, 2021 AT 7:42 PM (Merged)

Please login or register to post a reply.

Sponsored links