2008 Chrysler Town and Country Integrated Ignition Switch

Tiny
PETERAY62
  • MEMBER
  • 2008 CHRYSLER TOWN AND COUNTRY
  • 3.3L
  • 6 CYL
  • AWD
  • AUTOMATIC
  • 106,900 MILES
My problem just started on Sunday, May 25, 2014. I had stopped at a location, turned my van off to go inside and make my purchases. When I returned my van wouldn't start (no power to windows, locks & no dash lights except mileage). After a couple tries I turned my key in the opposite direction (never affected the way the van started before), the van started. Later that day, same thing. I didn't try to start it the following day (Memorial Day), but on Tuesday I tried and nothing. No dash lights, no power to windows or locks. That evening it started right up, twice, then the third time, nothing. It has been this way since. I've ordered a new key fob with chip, etc and will receive it tomorrow (Tues 6/3/2014). Could there be any other reason this problem has suddenly popped up and if so, what to do? I live on S.S. And have a very limited amount of funds, so please go easy. Thanks in advance for your advice and assistance.
Monday, June 2nd, 2014 AT 11:13 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Get it scanned it may be the integrated power module going bad
Was this
answer
helpful?
Yes
No
Monday, June 2nd, 2014 AT 12:12 PM
Tiny
LV2011
  • MEMBER
  • 1 POST
Hi, unfortunately I don't know to answer your question but I'm interested to know from where I can order a new key fob for Voyager 2011. Thanks.
Was this
answer
helpful?
Yes
No
Wednesday, June 18th, 2014 AT 6:18 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Look online or at a dealer
Was this
answer
helpful?
Yes
No
Wednesday, June 18th, 2014 AT 6:56 AM

Please login or register to post a reply.

Sponsored links