SPONSORED LINKS

How do I get the front rotors off?

Tiny
SIDDARE
  • MEMBER
  • 2007 MITSUBISHI OUTLANDER
  • 10,500 MILES
I've detached the calipers and caliper housing but the rotors won't budge. I've sprayed penetrating oil around the housing. Using a hammer, I've beat the front of the rotor and the rear of it. The hub assembly nut doesn't need to be taken off does it?
SPONSORED LINKS
Thursday, December 29th, 2011 AT 1:26 AM

2 Replies

Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Nope. Floating rotors. See image. Penetrating oil around the hub flange and lug studs should help.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Thursday, December 29th, 2011 AT 1:48 AM
Tiny
PATENTED_REPAIR_PRO
  • MECHANIC
  • 1,853 POSTS
Smack with the hammer flat in between each wheel lug stud going around a few times until it loosens up.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 13th, 2018 AT 7:03 AM

Please login or register to post a reply.

Related Brake Rotor Content

Rotor Stuck on Hub/Axle
GUIDE
Rotor Stuck on Hub/Axle
Much like a rear brake drum that gets stuck to the axle flange, a brake rotor is subject to the same type of problem due to the fresh metal on both the brake rotor and the...

Sponsored links