SPONSORED LINKS

2007 Mitsubishi Lancer Problem with IAC

Tiny
EHABHAMDI
  • MEMBER
  • 2007 MITSUBISHI LANCER
  • 1.6L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 100,000 MILES
When i'm trying to test the IAC by unplugging it with wires connected and ON the contact, the IAC get out so, I found it is ok but when i'm tryning to return it to its place I found it becomes longer and I can't fix the bolts so I want to return the IAC tip back in to allow me to return it.
SPONSORED LINKS
Monday, June 2nd, 2014 AT 7:27 AM

2 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
The way to test the IAC is with a scan tool. Applying voyage externally will damage the motor. The only way to retract it now is with a scan tool. Otherwise you may have to replace the motor

Roy
Was this
answer
helpful?
Yes
No
Monday, June 2nd, 2014 AT 8:54 AM
Tiny
EHABHAMDI
  • MEMBER
  • 2 POSTS
Thank roy
but unfortunately I don't have this scan tool, i'm doing this trier in at home,
but another question, is this motor need calibration or something like that to work properly?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, June 2nd, 2014 AT 1:02 PM

Please login or register to post a reply.

Related Idle Air Control Content

Idle Air Control Clean
VIDEO
Idle Air Control Clean
Instructional repair video
Idle Air Control Valve Service
GUIDE
Idle Air Control Valve Service
The idle air control valve is responsible for controlling the engine idle speed via the car's PCM (computer). These valves are configured differently depending on...
VIEW MORE

Sponsored links