Where is the noise coming from?
Does it occur when you turn the steering with front end lifted up?
Who installed the steering and was everything fitted correctly?

Answered by KHLow2008 (expert)
39,855 answers provided

I installed it and yes it occurred while lifted up and when i lowered it and noise still occurred eps light is still on sounds worse then before with original rack n pinion

Response from alfredm8702
40 questions asked

The DTCs are memorized in the EEPROM (nonvolatile memory) therefore the memorized DTCs cannot be erased by disconnecting the battery.

You would need the appropriate scan tool to clear DTCs.

Is the rack completely new, rebuilt or used?

Answered by KHLow2008 (expert)
39,855 answers provided

The rack and pinion was used from a previous si and the used one made a horrible sound compared to original

Response from alfredm8702
40 questions asked

The problem could be with the rack but first of all you need to get the Indicator light off first. When it is showing, the system is not going to work correctly untill at least a few runs.

Try turning the steering with engine off, does it make any difference?

Answered by KHLow2008 (expert)
39,855 answers provided