Here are the procedures for resetting the maintenance reminder light.
ENGINE OIL CHANGE REMINDER LIGHT RESET - PROCEDURE 1
With Smart Key System
NOTE:
DO NOT depress brake pedal when selecting modes to avoid engine from starting.
On vehicles with smart key system, make sure smart key is in the vehicle. Pressing the "ENGINE START STOP" switch changes the ignition switch mode as follows:
• First Time - ACC mode (accessories on).
• Second Time - ON mode (power on and all accessories on).
• Third Time - Power OFF mode (indicator light is off).
To reset MAINT reminder light after engine oil replacement, place smart key system in power OFF mode with odometer reading showing. Place smart key system in ON mode while holding down trip meter RESET button.
Hold trip meter RESET button down for at least 5 seconds. Odometer should indicate "000000" and MAINT reminder light goes out.
Without Smart Key System
To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer reading showing. Turn ignition switch to ON position while holding down trip meter RESET button.
Hold trip meter RESET button down for at least 5 seconds. Odometer should indicate "000000" and MAINT reminder light goes out.
Mar 4, 2011 at 6:18 PM
