how to replace fan switch on a 2006 hyundai accent
Sep 13, 2011 at 9:53 PM
how to remove the fan switch
2006 HYUNDAI ACCENT
GARYMARQ
- MEMBER
- 3 POSTS
- FOLLOW
Advertisement
Which fan switch are you talking about? Can you give me more information? The more you give the better I'll be able to help you.
Sep 14, 2011 at 6:55 PM
the fan that blows air for the heater and a/c.
I can get the ****s off but cant get the rings or black clips behind them out so that i can replace the switch.
I can get the ****s off but cant get the rings or black clips behind them out so that i can replace the switch.
Sep 14, 2011 at 8:52 PM
The factory service manual says to use a screwdriver. Will that work?
Sep 14, 2011 at 9:36 PM
are you kidding me? what kind of awnser is that,Use a screwdriver!
I need detailed instruction on the procedure start to finish.
I need detailed instruction on the procedure start to finish.
Sep 15, 2011 at 3:19 AM
This is the procedure straight from the factory service manual:
"remove the center facia lower panel by pulling it using a screwdriver after disconnecting clips. Avoid damaging retainer clips."
This is as detailed as the service manual gets. If any other experts can help you more they will post here.
"remove the center facia lower panel by pulling it using a screwdriver after disconnecting clips. Avoid damaging retainer clips."
This is as detailed as the service manual gets. If any other experts can help you more they will post here.
Sep 15, 2011 at 5:44 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.