Where is the crankshaft position sensor located?

Tiny
GREGORGODLER
  • MEMBER
  • 2006 FORD FOCUS
  • 115,000 MILES
Hello, on my car I have obd code P0336 (Crankshaft Position Sensor A Circuit Range/Performance). Is this sensor located inside engine or somewhere outside?
Do you
have the same problem?
Yes
No
Friday, October 12th, 2012 AT 5:35 PM

24 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
External. Refer to diagram. Check for loose or contaminated wire harness connectors first.

Check this video

https://youtu.be/_xoGyRrHYbM

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+3
Friday, October 12th, 2012 AT 5:49 PM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
What engine and model? Sure code is correct?
Was this
answer
helpful?
Yes
No
+3
Friday, October 12th, 2012 AT 5:50 PM
Tiny
GREGORGODLER
  • MEMBER
  • 3 POSTS
Hello, thank you for a very quick response. Here are more details about my Focus and problems. I have Ford Focus II, engine 2.0 TDCi. When I was driving car, it shaked twice like the ESP went on and then I got on display two errors. First was System Engine Fault and the second was ESP System Fault. Engine turned off by it self. I turned the car key to the off position and then back to turn on. The car started with no problem. I managed to get home. At home I connected to OBD controller and check for errors with my android phone. I've got this errors:
-U2023 - Network
-U2196 - Network
-P0336 - Crankshaft Position Sensor Range/Performance

Car is now running normally, well in my garage :)

So is there really "dead" sensor or is it something else?
Was this
answer
helpful?
Yes
No
+2
Friday, October 12th, 2012 AT 6:07 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
An intermittent problem which could mean a loose connection somewhere and is not going to be easy to diagnose for the U-codes. Try clearing the codes and see if they reappear.
Was this
answer
helpful?
Yes
No
Friday, October 12th, 2012 AT 6:11 PM
Tiny
GREGORGODLER
  • MEMBER
  • 3 POSTS
OK, I will try that and report.
Was this
answer
helpful?
Yes
No
Friday, October 12th, 2012 AT 6:25 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Mod doesn't show a p0336. That was probably what docfixit was asking? Info on the u-codes says to fix all other codes first.
Was this
answer
helpful?
Yes
No
+1
Friday, October 12th, 2012 AT 6:55 PM
Tiny
JAVIGH
  • MEMBER
  • 1 POST
Hello.
Any news on this? I have a Ford focus 2.0 TDCi '09 and I have the exact same codes: U2023, U2196, P0336. Coincidence? Maybe not!
The symptoms of my car is that it stops. It doesn't matter if you're going 70 mph, or idling in a traffic light. The engine just quits. It's a matter of removing the key, and try to start it again. And it goes like nothing happened. I've tried to clear the codes and when it happens, it returns the same three codes. It usually happens like once every 400-500 km (250-300 miles). Today for example it didn't want to start. I had to crank it three times (this problem is the first time that has happened) and after the first two, the ESP light stayed on, like saying there was some kind of problem with it. Other times, it said "Transmissions malfunction" on the dash board (it's a powershift). So I'm thinking there should be some kind of common problem that affects the crankshaft sensor and whatever it's creating the other two codes. But I have no idea. In the service they want to change the crankshaft sensor but I don't think that's the problem. You know how the official services are.

Do you have any clues? I guess should look for wiring problems or something first.

Thank you!

Regards.
Was this
answer
helpful?
Yes
No
Thursday, July 13th, 2017 AT 3:17 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,554 POSTS
Hello,

The U codes are communication between the computers, you must have one that is going bad which is common on these cars. When you turn the key off and then back on it resets (reboots) the computer.

Please let us know what happens.

Cheers, Ken
Was this
answer
helpful?
Yes
No
+1
Friday, July 14th, 2017 AT 11:48 AM
Tiny
MOLOKO
  • MEMBER
  • 1 POST
  • 2006 FORD FOCUS
  • 2.0L
  • 4 CYL
  • FWD
  • MANUAL
  • 1,154,345 MILES
Where is the position of crankshaft sensor?
Was this
answer
helpful?
Yes
No
+1
Saturday, May 23rd, 2020 AT 12:01 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See pic it's for a 2.3L 2.0L is similar we no longer get engine size on our site so it's more difficult for us
Was this
answer
helpful?
Yes
No
+1
Saturday, May 23rd, 2020 AT 12:01 PM (Merged)
Tiny
TUCSON BLAZE 42
  • MEMBER
  • 1 POST
  • 2003 FORD FOCUS
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 115,000 MILES
Where is the crankshaft position sensor?
Was this
answer
helpful?
Yes
No
+1
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Hello,

Check out this video with diagrams below to help show you how to replace it with a diagram below.

https://youtu.be/_xoGyRrHYbM

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+8
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Crankshaft Position Sensor (2.0L DOHC)On lower left rear of engine.
Crankshaft Position Sensor (2.0L DOHC-SVT)On front of engine.
Crankshaft Position Sensor (2.0L SOHC)On right front of engine.
Was this
answer
helpful?
Yes
No
+10
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
AJAYHARIHAR
  • MEMBER
  • 15 POSTS
  • 2006 FORD FOCUS
I want to set the timing for my ford focus 1.6l engine and I want to know to know how to replace crankshaft seal and how to lock engine.
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Timing is set by the computer it's non adjustable. To replace crank seal you need to pull harmonic balancer off. You should use teh special tools for it but no big deal, usea screwdriver to pry it out and then if you have a socket or soem thing large enough to beat or push it in so you dont damage it.
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
FROGDOGS
  • MEMBER
  • 1 POST
  • 2003 FORD FOCUS
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 107,000 MILES
Where is the 2003 Ford focus crank sensor located
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Hello,

Here is the location of the crankshaft sensor and a video of the job being done.

https://youtu.be/_xoGyRrHYbM

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
-1
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
METORTUE
  • MEMBER
  • 1 POST
  • 2002 FORD FOCUS
2002 Ford Focus 4 cyl

Where is the crankshaft sensor located on a 2002 Ford Focus ZX3?
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Crankshaft Position Sensor


https://www.2carpros.com/forum/automotive_pictures/12900_cps1_10.jpg




https://www.2carpros.com/forum/automotive_pictures/12900_cps2_7.jpg

Was this
answer
helpful?
Yes
No
+4
Monday, July 6th, 2020 AT 12:03 PM (Merged)
Tiny
BABYBOO285
  • MEMBER
  • 3 POSTS
  • 2001 FORD FOCUS
  • 1.6L
  • MANUAL
  • 130,000 MILES
I have a ford focus zetec 2001, it's just had MOT done and they had to replace the crank shaft sensor, I was told that because it had been replaced it would probably only last a week but could last longer, I just wondered if anyone else had had this problem as I'm scared to use the car now.
Was this
answer
helpful?
Yes
No
Monday, July 6th, 2020 AT 12:04 PM (Merged)

Please login or register to post a reply.

Sponsored links