Seat belt light

BHAYES77

MEMBER
2006 FORD CROWN VICTORIA

We have about three 06 crown vic police interceptors that the seat belt light stays on and will not go off. On one of the cars we have replaced the seat belts, the seat belt tensioner, and the wiring harness per ford which none of these has fixed the problem

3 Replies

DRCRANKNWRENCH

MECHANIC
3,380 POSTS

Sometimes they have a weight sensor that goes bad and if it thinks someone is sitting in the passenger seat without putting on their seatbelt, also the switch in the buckle could be bad, it will throw that light. The best thing to do is to have the trouble codes pulled. Any Advance Auto or Auto Zone will do this for free.

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Thursday, October 4th, 2012 AT 12:13 AM

DANIEL JAMESON

MEMBER
1 POST

But what if the codes pulled are for restraint systems and air bags, three in total? Have replaced the driver's seat buckle cause it was crushed but it still has some of the other codes.

Was this

answer

helpful?

Yes

No

Wednesday, December 21st, 2016 AT 12:57 PM

KEN L

MASTER CERTIFIED MECHANIC
42,883 POSTS

Hey DANIEL,

This system takes a special scanner to read the system to see which sensor has gone bad. You might need to take it to the dealer.

Please let us know what you find so it will help others.

Best, Ken

Was this

answer

helpful?

Yes

No

+1

Saturday, December 24th, 2016 AT 2:01 PM