WHERE IS THE BANK 1 SENSOR 1 LOCATED AND HOW DO I GET TO IT TO CHANGE IT. PLEASE
2006 Cadillac DTS • 94,000 miles
Bank 1 sensor 1, Cadi wanted way to much to change it and I disabled so I'm trying to change it myself. would really use your insite.
Bank one is the rear bank on this, if you go down over the rear cam cover about where the secondary air valve is, it threads into the top of the manifold. You will probably need a crowfoot, and possibly a universal extension. The sensor connector is clipped to the same bracket as the secondary air check valve.
Hey Factoryjack, do you have a picture of the bank 1 sensor 1 from the top / boottom. whats a crowfoot?
A crowfoot is basically, an end wrench, made to go on the end of an extension, working from the side like a wrench, in a space suited for a socket. Here is a picture.
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as ...
3 answers • 2010 All Other Makes All Other Models
I have a 2000 bonneville ssei. It has 2 02 sensors. I get the code that says cat. sys. efficency ...
1 answer • 2000 Pontiac Bonneville • 150,000 miles
The service manual for my 1996 GMC Sierra tells me that my truck has four oxygen sensors. They are ...
1 answer • 1996 GMC Sierra • 125,000 miles
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles