Headlight replacement

Tiny
FPULL
  • MEMBER
  • 2005 PONTIAC MONTANA
  • 99,000 MILES
Wanting to replace headlamp on my montana. Have the bolt and pin out, but must be some other retainer behind.
Friday, April 22nd, 2011 AT 2:08 PM

5 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Remove two wing nuts then lift up and pull forward see diagram. Lamp filled with nitrogen Must lay lnes flat down on cloth before removing bulb
Was this
answer
helpful?
Yes
No
Friday, April 22nd, 2011 AT 2:15 PM
Tiny
RALPHIE1234
  • MEMBER
  • 2 POSTS
  • 1999 PONTIAC MONTANA
How do I replace the headlight bulbs?
Was this
answer
helpful?
Yes
No
Tuesday, December 22nd, 2020 AT 5:53 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Replacing the whole assembly or just the bulbs?
Was this
answer
helpful?
Yes
No
Tuesday, December 22nd, 2020 AT 5:53 PM (Merged)
Tiny
RALPHIE1234
  • MEMBER
  • 2 POSTS
The whole assembly
Was this
answer
helpful?
Yes
No
Tuesday, December 22nd, 2020 AT 5:53 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
The bulbs are removed from rear of assembly after removing headlight assembly. There are two wing nuts securing the entire plastic headlight assembly. One is mounted at the top-inboard(towards engine), And the other is outboard of the assembly. Once these two wingnuts are removed, carefully remove the whole assembly
Was this
answer
helpful?
Yes
No
Tuesday, December 22nd, 2020 AT 5:53 PM (Merged)

Please login or register to post a reply.

Sponsored links