2005 Nissan Xterra driveline bolts

Tiny
BMXWAYNE
  • MEMBER
  • 2005 NISSAN XTERRA
  • 4.0L
  • V6
  • 4WD
  • MANUAL
  • 90,000 MILES
I am doing the clutch on my 2005 xterra 4wd and cannot find what grade the bolts for the drive lines are the heads just have two parallel lines I am unable to find a chart that shows that marking anywhere
Thursday, February 19th, 2015 AT 3:01 PM

5 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,738 POSTS
I don't know which bolts you're referring to, but you can't go wrong with grade 8 bolts. You'll find those at any hardware store or farm supply store. If what you need is a special bolt length or oddball size head, etc, your best bet is to get new ones from the dealer or find used ones in a salvage yard.
Was this
answer
helpful?
Yes
No
Thursday, February 19th, 2015 AT 5:35 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
Drive line is vague. Which bolts are you referring to?
Was this
answer
helpful?
Yes
No
Thursday, February 19th, 2015 AT 6:39 PM
Tiny
BMXWAYNE
  • MEMBER
  • 58 POSTS
The u-joint flange bolts
Was this
answer
helpful?
Yes
No
Thursday, February 19th, 2015 AT 9:11 PM
Tiny
BMXWAYNE
  • MEMBER
  • 58 POSTS
Used bolt from a junkyard are out of the question I am looking to go get new bolts as the repair manual states the manufacturer recommends replacing the bolts with new ones anytime they are removed
Was this
answer
helpful?
Yes
No
Friday, February 20th, 2015 AT 6:39 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,170 POSTS
In that case, I would recommend just what carodiodoc said, grade 8. And yes, I understand why you don't want used ones.
Was this
answer
helpful?
Yes
No
Friday, February 20th, 2015 AT 9:22 AM

Please login or register to post a reply.

Sponsored links