2005 Dodge Ram Repair Question
Topics covered: Fuse, Wiring, Wiring harness.
Mileage: 98,000 miles.
Mileage: 98,000 miles.
Asked on December 27, 2012
Dodge Ram Fuse Problem
I have a 2005 Dodge Ram 1500 Laramie SLT that has a 40/20/40 bench seat in it. The driver's part of the seat is manual. Can I take a power seat out of a 2006 truck (same model) that is also a 40/20/40 and have it work:
1. Are the bolt hole patterns the same?
2. Does the fuse block accomodate the switch?
3. Do I have to get the harness from the seat assembly that goes to the main wiring harness?
The fabric color and pattern is an exact match as well.
Thanks!
1. Are the bolt hole patterns the same?
2. Does the fuse block accomodate the switch?
3. Do I have to get the harness from the seat assembly that goes to the main wiring harness?
The fabric color and pattern is an exact match as well.
Thanks!
Asked by (pending member)Answer
Replied on December 27, 2012
you will need a lot the seat will bolt in and the switch will be on the seat, yo will need the harness and then a relay and seperate fuse lot of work jsut to move a seat every once in a while.
