How to replace wheel bearings

Tiny
GMLUCKIE
  • MEMBER
  • 2000 TOYOTA TUNDRA
Drive Train Axles Bearings problem V8 Two Wheel Drive Automatic

I need instructions on replacing the wheel bearings on my 2000 tundra.
Do you
have the same problem?
Yes
No
Tuesday, February 2nd, 2010 AT 2:18 PM

2 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,554 POSTS
Hello,

You must start by jacking up the car Here is a guide for that.

https://www.2carpros.com/articles/jack-up-and-lift-your-car-safely

Next here are some guides that will show you everything you need to know about replacing wheel bearings.

https://www.2carpros.com/articles/how-to-repack-axle-bearings

and

https://www.2carpros.com/articles/bearing-hub-replacement

and

https://www.2carpros.com/articles/how-to-replace-front-wheel-bearings-and-seals

Here is some a guide (below) for your truck as well.

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken

Was this
answer
helpful?
Yes
No
+1
Monday, June 12th, 2017 AT 4:23 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
REMOVE BRAKE CALIPER AND DISC
Remove the bolt and brake line clamp from the steering knuckle.
Remove the 2 bolts, brake caliper and disc.
Support the brake caliper securely.
Fig. 1: Removing Brake Caliper And Disc
Courtesy of TOYOTA MOTOR SALES, U.S.A, INC.
REMOVE HUB BOLT
Using SST and a screwdriver or an equivalent, remove the hub bolt.
SST 09650-1701 1
Was this
answer
helpful?
Yes
No
-2
Monday, June 12th, 2017 AT 4:23 PM (Merged)

Please login or register to post a reply.

Sponsored links