i replaced crank sensor still same problem tried testin cam sensor & no voltsge,bettery is hot ignition hot whats up
Mar 15, 2012 at 3:23 PM
no start no spark
2004 NISSAN FRONTIER
BBM123
- MEMBER
- 8 POSTS
- FOLLOW
Advertisement
Do you have any codes?
Mar 15, 2012 at 3:54 PM
Ignition Spark Delivery System - The ignition system components include: spark plugs, spark plug wires, distributor (if applicable), crankshaft angle sensor, camshaft angle sensor, ignition coil, ignition module, knock sensor and PCM (powertrain control module). The engine relies on the ignition spark to be delivered to the combustion camber at the correct time. If the ignition spark stops or is delivered at the wrong time the engine will not run or run poorly.
Mar 15, 2012 at 3:55 PM
there are no troubke codes
Mar 15, 2012 at 4:07 PM
could it be the ecm
Mar 15, 2012 at 4:18 PM
Have you checked the security system to see if is the one causing the problem?
Mar 15, 2012 at 4:31 PM
no sir, how would i check it
Mar 15, 2012 at 4:35 PM
Is the security light or key symbol indash blinking when you try to crank the engine?
If you have a spare key, try using it.
If you have a spare key, try using it.
Mar 15, 2012 at 4:39 PM
no spare key
Mar 15, 2012 at 5:25 PM
Do you have spark?What is your actual fuel pressure?I would check those two things first.
Mar 15, 2012 at 5:42 PM
any other suggestions
Mar 15, 2012 at 5:45 PM
has no spark & no voltage to cam sensor
Mar 15, 2012 at 5:49 PM
Is the security light on solid or flashing you never did say?
Mar 15, 2012 at 6:01 PM
no niether one
Mar 15, 2012 at 6:27 PM
What size engine do you have?Its not supercharged is it?
Mar 15, 2012 at 8:21 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.