2004 Jaguar X-Type A/C Compressor removal

Tiny
DSKOMORUCHA
  • MEMBER
  • 2004 JAGUAR X-TYPE
  • 3.0L
  • V6
  • 4WD
  • AUTOMATIC
  • 115,000 MILES
I have a new A/C Compressor w/brand clutch. I want to remove the old one and replace with new one. I have a shop to charge it! So what is sequence? Dennis
Saturday, August 2nd, 2014 AT 3:56 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Remove old compressor then remove line form orifice and throw orifice away back flush the ac system from orifice to compressor, replace drier as well then making sure all the debris from old compressor is out install new one, replace orifice and drier with new tighten all fittings and add oil for compressor if no oil in compressor then pump down or evacuate for at least 30 minutes then charge system.
Was this
answer
helpful?
Yes
No
Saturday, August 2nd, 2014 AT 4:20 PM
Tiny
FREEMBA
  • MECHANIC
  • 1,152 POSTS
These instructions are only to be followed if the A/C system has already been emptied of refrigerant. Remember, it is illegal to vent refrigerant to the atmosphere, so the A/C system must be properly evacuated, using a refrigerant recovery system.

1. Remove (unbolt) the A/C line from the compressor.
2. Remove the A/C belt.
3. Unbolt the compressor from the engine.
4. Reverse to install.

These may sound like simple instructions and they are, in theory, However, the space to work in is tight and it may take some time for you to complete the task.
Once the compressor is removed, you should also replace the orifice tube and accumulator.
Was this
answer
helpful?
Yes
No
Saturday, August 2nd, 2014 AT 6:04 PM
Tiny
DSKOMORUCHA
  • MEMBER
  • 2 POSTS
How to remove & replace a new A/C compressor with new clutch on a 2004 XTYPE Jaguar, 3.0 L AWD?
Was this
answer
helpful?
Yes
No
+2
Wednesday, August 13th, 2014 AT 5:34 PM

Please login or register to post a reply.

Sponsored links