When I lock the steering the engine cuts out

Tiny
SAMRYAN81
  • MEMBER
  • 2003 MAZDA 6
  • 80,000 MILES
I recently put a new engine, flywheel and clutch in my car and since then when there is no revs and I lock the steering the engine cuts out but if there are revs it doesnt my mechanic cant find the problem
Saturday, July 7th, 2012 AT 8:59 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See if there is awire pinched due to the engine removal. It may be cutting power or fuel to the engine. If it is a different model engine that may be cause as well.
Was this
answer
helpful?
Yes
No
Saturday, July 7th, 2012 AT 10:51 PM
Tiny
SAMRYAN81
  • MEMBER
  • 2 POSTS
No the mechanic said there is no pinched wire. Still have the problem and anyone I speak to is drawing a blank. Please help I miss my car!
Was this
answer
helpful?
Yes
No
Tuesday, August 28th, 2012 AT 3:02 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Try cleaning the throttle plate on both sides with choke cleaner, then check fuel pressure and then have you power steering switch checked it may be causing this. When you lock there is a switch there to increase the rpms.
Was this
answer
helpful?
Yes
No
Tuesday, August 28th, 2012 AT 3:28 PM

Please login or register to post a reply.

Sponsored links