2003 Lincoln Navigator brakes

Tiny
GUERO1
  • MEMBER
  • 2003 LINCOLN NAVIGATOR
  • V8
  • 4WD
  • AUTOMATIC
  • 140,000 MILES
2003 LINCOLN NAVIGATOR
I'eve change the master cylinder, bleed the 4 calipers and the master cylinder checked the brakes fluid lines and no leaking, and the brake pedal still goes to the floor slowly, even if I pump the pedal two or three times stay up a second and then goes down slowly again, what do you think it is?
Do you
have the same problem?
Yes
No
Sunday, February 22nd, 2015 AT 7:49 PM

2 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 107,922 POSTS
I hate to say it, but either you have air in the system, a leak, or got another bad master cylinder.

Take a look at the flow chart for problems and let me know if anything on it helps. NOTE: This flow chart is direct from Mitchell / Snap-on.

Also, let me know if and how you bench bled the MC as well as if you did it on the vehicle. Also, did you start at the wheel furthest from the MC and work your way to the closest?
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2015 AT 8:49 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 107,922 POSTS
Let me try the pic again. If it doesn't work, it won't let me. However, I can tell you that listed under the pedal going slowly to the floor were the following:

Check for external and internal leaks in the system.
Was this
answer
helpful?
Yes
No
Sunday, February 22nd, 2015 AT 8:51 PM

Please login or register to post a reply.

Sponsored links