how to replace fan switch
Mar 21, 2013 at 5:41 PM
2003 Gmc C1500 Replace Fan Switch
2003 GMC C1500
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
Removal Procedure
1. Remove the instrument cluster trim plate bezel. Refer to BEZEL REPLACEMENT INSTRUMENT PANEL (I/P)
2. Remove the instrument panel storage tray.
3. Remove the accessory switch assembly from the instrument panel. Refer to ACCESSORY SWITCH REPLACEMEN
4. Remove the screws from the HVAC control assembly.
5. Remove the HVAC control assembly, with the following procedure:
5.1. Release the retaining tabs.
6. Disconnect the electrical connectors from the HVAC control assembly.
note pull bezel first and then if you can get switch out then replace it if not whole module assy has to be replaced. let car run for one minute after install before trying to seeif it works.
1. Remove the instrument cluster trim plate bezel. Refer to BEZEL REPLACEMENT INSTRUMENT PANEL (I/P)
2. Remove the instrument panel storage tray.
3. Remove the accessory switch assembly from the instrument panel. Refer to ACCESSORY SWITCH REPLACEMEN
4. Remove the screws from the HVAC control assembly.
5. Remove the HVAC control assembly, with the following procedure:
5.1. Release the retaining tabs.
6. Disconnect the electrical connectors from the HVAC control assembly.
note pull bezel first and then if you can get switch out then replace it if not whole module assy has to be replaced. let car run for one minute after install before trying to seeif it works.
Images (Click to enlarge)
Mar 22, 2013 at 2:06 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.