OIL PUMP GASKET
2003 Dodge Ram • 5.7L V8 4WD Automatic •
I bought a new engine and mp but had only o ring for tube for the oil but the gasket that goes to the mating face on the block can any one help me can I make one with gasket material due to one they sent in a another kit it was to small but it had metal lining in the gasket but can I used the harder gasket material fel-pro karropak
If the gasket is still on the block and not damaged it can be reused. If not you can get gasket material from autoparts and use a small hammer and make one by tapping the gasket around housing. Kind of hard to explain on here.
Does this 2003 hemi take a gasket or does it just mount the oil pump reliving on machine surface to seal it doesn't look like it takes a gasket so do we know forsure
I screwed up it doesn't take a gasket sorry I was looking at something else.
I have a 1997 Silverado K 1500 4x4, Automatic, 5.7 Liter V-8 / a 2003 Ford Taurus SES, 3.0 Liter V-6 (Standard motor , not overhead cam), Automatic / and a 1997 Ford Taurus GL, 3.0 ...
1 answer • 1997 Ford Taurus • 140,000 miles
I have a 91 buick centery it wont start..before that i was driving down the road and it acted like it wasnt getting gas..if i presses on the gas it got worse i had to let it get gas on ...
3 answers • 1991 Buick Century • 60,000 miles
I HAVE A 2003 FORD RANGER EDGE....IT STARTS BUT I DONT THINK THE INJECTORS ARE SENDING FUEL TO THE SPARK PLUGS..I CHANGED THE SPARK PLUGS AND IT SEEMS TO BE BURNING THEM BECAUSE THERE ...
10 answers • 2003 Ford Ranger • 68,000 miles