how to re-program a honda accord remote fob
Mar 9, 2011 at 6:56 PM
re-programming remote fob
2001 HONDA ACCORD
999
- MEMBER
- 1 POST
- FOLLOW
Advertisement
1.Turn ignition on (RUNII)
2.within 1-4 seconds press the lock or unlock button with the transmitter aimed at the glovebox
3. within 1-4 seconds turn the ignition off
4.within 1-4 seconds turn the ignition on (RUNII)
repeat steps 2-4 two more times. At the end of the second cycle, the lock actuators will lock/unlock if completed successfully.
2.within 1-4 seconds press the lock or unlock button with the transmitter aimed at the glovebox
3. within 1-4 seconds turn the ignition off
4.within 1-4 seconds turn the ignition on (RUNII)
repeat steps 2-4 two more times. At the end of the second cycle, the lock actuators will lock/unlock if completed successfully.
Mar 9, 2011 at 9:17 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.