SPONSORED LINKS

How do you trace a turn signal problem?

Tiny
HARPSTDAVE
  • MEMBER
  • 2001 DODGE INTREPID
  • 145,000 MILES
Turn signal and hazards do not light up or make a sound. Checked the fuses and replaced turn signal/hazards unit and turn signal switch and still nothing. Assuming its a wiring or a relay I don't know about.
Friday, April 13th, 2012 AT 1:01 AM

3 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Fuses need to be verified with a test light for power.
The connector behind the switch is a common issue.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, April 13th, 2012 AT 1:05 AM
Tiny
HARPSTDAVE
  • MEMBER
  • 3 POSTS
Fuses are good and power is at the panel. Wire harness at switch and relay unit also have one power wire coming in. What else should I check.
Was this
answer
helpful?
Yes
No
Sunday, April 15th, 2012 AT 1:04 AM
Tiny
HARPSTDAVE
  • MEMBER
  • 3 POSTS
Is there a way for me to put a jumper wire to the wire harness to check to see if the problem is before or after the switch? Someone have a wiring diagram?
Was this
answer
helpful?
Yes
No
Monday, April 16th, 2012 AT 9:42 PM

Please login or register to post a reply.

Related Turn Signal Switch Content

Turn Signal Switch Replacement
GUIDE
Turn Signal Switch Replacement
A turn signal switch is designed to activate the directional signals either right or left by the driver when desired.
VIEW MORE

Sponsored links