Sunday, February 27th, 2011 AT 4:19 PM
BESTDAD
- MEMBER
- 2000 MITSUBISHI MONTERO
- 4WD
- AUTOMATIC
Replacing rear tail light? Access
Tail light
1 Reply
PROTECH1980
- MEMBER
- 901 POSTS
I personally have not changed a bulb on this model but I thought I would do some quick research for you and this it what I found:
Open the tailgate of your Montero Sport. Remove the two screws from the taillight assembly on the inside edge of the tailgate with a Phillips head screwdriver.
Pull the taillight assembly forward and out of the back of the truck. Insert a flat head screwdriver near each tab on the edge of the tail light lens. Pry the lens apart to access the bulbs. Pull the bulb out of the socket.
Push the replacement bulb into the socket. Press the tail light assembly back together until it locks. Insert the assembly into the rear of the truck and secure it with the two screws. Tighten the screws with the Phillips head screwdriver.
I hope this helps, let know if you have any more questions.
Open the tailgate of your Montero Sport. Remove the two screws from the taillight assembly on the inside edge of the tailgate with a Phillips head screwdriver.
Pull the taillight assembly forward and out of the back of the truck. Insert a flat head screwdriver near each tab on the edge of the tail light lens. Pry the lens apart to access the bulbs. Pull the bulb out of the socket.
Push the replacement bulb into the socket. Press the tail light assembly back together until it locks. Insert the assembly into the rear of the truck and secure it with the two screws. Tighten the screws with the Phillips head screwdriver.
I hope this helps, let know if you have any more questions.
SPONSORED LINKS
Was this helpful?
Yes
No
Sunday, February 27th, 2011 AT 9:34 PM
