car is blowing hot air

2000 MERCURY SABLE
200,000 MILES
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
I have a 2000 mercury Sable and it started to blow hot air I have opened the glove box and located the actuator and when the ac is turned on it seems to make noise what could it be
Jul 28, 2012 at 1:15 PM
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
first, check the pressures of the ac system for operation then we can talk about mode doors.

Roy
Jul 28, 2012 at 1:26 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
Ac system is fine 65/195
Jul 28, 2012 at 1:28 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
blend door motor is a common failure. can you hear the door moving??

Roy
Jul 28, 2012 at 1:52 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
No distinct sound just a kind of hum
Jul 28, 2012 at 1:56 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
sounds like your issue.

Roy
Jul 28, 2012 at 2:00 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
what is, and how do you fix it
Jul 28, 2012 at 2:06 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
it is a blend door motr, available at a parts store and it is held by 3 smal bolts and an electrical connector. it is very tight to acess.

Roy
Jul 28, 2012 at 2:28 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
I got a new actuator and plugged it in and it does not work ether this car has a circuit board next to the actuator and the plugs are connected any idea as to why it is not working
Jul 28, 2012 at 4:40 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
fuse is good to
Jul 28, 2012 at 4:42 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
you said it was humming?????

plugs??? it has 1 connector.

Roy
Jul 28, 2012 at 4:44 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
humming was something else door actuator will not move at all it is electric with a plug that plugs into the side of it
Jul 28, 2012 at 4:47 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
the blend door is a small square box with 1 small connector and a round shaft the engages a shaft in the heater housing.

it is at the glove box to the left low on the housing.

is this the same unit you got>>

Roy
Jul 28, 2012 at 4:51 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
YES plugged a new one in and it will not move ether this is a computer controlled ac system
Jul 28, 2012 at 4:59 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
automatic climate conteol???

Roy
Jul 28, 2012 at 5:00 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
Yes
Jul 28, 2012 at 5:08 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
different system that does not use that at all. whatever you got is wrong as this box is for manual air systems

you need a shop with a scan tool that can monitor the actions of the programmer to determine the failure.

sorry for the confusion. it is not a common option for this model

Roy
Jul 28, 2012 at 5:13 PM
Avatar
LEERICHTER
  • MEMBER
  • 10 POSTS
I assume you have never dealt with this before
Jul 28, 2012 at 6:03 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
yes, i have but without a scan tool, everything is a guess. auto systems are computer controlled and you need to see values that are available in a scan tool.

Roy
Jul 28, 2012 at 6:27 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.