2000 Jaguar Vanden Plas DTC

BLACKHONOR9

MEMBER
2000 JAGUAR VANDEN PLAS
4.0L
V8
RWD
AUTOMATIC
94,000 MILES

I am getting several trouble codes and need information in order to fix. P0010 is related to me unplugging the VVT solenoid. P0332 is the knock sensor. I think this keeps the engine going into restricted performance mode. Is there a way to disable the knock sensor to keep it from going into restricted performance mode until I get a sensor? P0358 is a misfire on cyclinder 8 which I think is a easy fix. P1384 is a issue with the vvt unit or oil flow. I think this is fixed. I won't know until I erase. The last two P1642 and p1797 are the ones I reaaly need help with. First, how do I begin to address these? These are related to the CAN. So what steps should I take? Re there sensors I need to replace or check? Thanks in advance for all your help.

1 Reply

HMAC300

MECHANIC
48,601 POSTS

Can refers to computer aided network problem, meaning different signals are sent throught eh same wire to the ecm. This may be an ecm/tcm problem but I'm sending check in pic to see if it's a short in wiring if it is you'll have to follow it down. This is for the 1642 code. The misfire may be setting your knock sensor off so fix that first and no you can't disconnect sensor to temporarily fix it.

Image (Click to make bigger)