WHEN START CAR WON'T INITIALLY REVERSE UNLESS GO INTO FIRST FIRST. MAKES A CLUNKING NOISE WHEN IT GOES IN REVERSE.
2000 Hyundai Accent • 170,000 miles
Was a problem then seemed to stop being a problem. Started again but worse. When go to take off can't reverse unless add a lot of revs and then feels like it is breaking through something and makes a clinking sound. Easier when I go into first and then go into reverse. Starting to make clunking noise when asking off in 1st. Gear change when driving absolutely fine.
June 17, 2012.
June 17, 2012.
I would start with a transmission pressure test to rule out a low fluid pressure issue.
In the past couple of weeks I have had a few problems with my car. The last time I got an oil change I was told that the plug for the oil was the wrong size and that is what was causing...
1 answer • 2000 Dodge Neon • 118,000 miles
I hear a clunking or clicking noise when turning the wheel i removed wheels started the engine put it in drive turned the steering wheel heard noise seen no movement at drive shafts ...
1 answer • 1999 Chrysler Town and Country • 231,000 miles
Was advised to change aldernator for a clunking noise in that area after mechanic put a screwdriver to it. That did not get rid of the noise. It is a 2001 Dodge Grand Caravan. Now ...
2 answers • 2001 Dodge Caravan
I have a 2002 dodge caravan making a clunking noise from the back right brake area - had new tires put on 6 weeks ago and at that time they said my brakes were good . Any ideas?
1 answer • 2002 Dodge Caravan