Runs good until it warms up

Tiny
DEREK926
  • MEMBER
  • 2000 GMC JIMMY
  • 105,000 MILES
2000 jimmy, 4.3l, then misfires, someone stole the cat and they straight piped it, could that be the cause it shows the p0300 code, I put new wires, plugs, cap and rotor, runs fine until it warms up then hesitates and misfires, the cat was stolen and the previous owner straight piped it, could this be the cause of it running rough, also showed p0132 code, 02 sensor circuit high volts [ bank 1 sensor 1], what does that mean, is it related to the cat?
Do you
have the same problem?
Yes
No
Thursday, January 12th, 2012 AT 10:02 PM

5 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
That isn't street legal. If you live in a state that does sniffer/inspection tests, it won't pass.

Bank 1 sensor 1 is before the cat. The system may be running rich? Any applicable codes?
Was this
answer
helpful?
Yes
No
Thursday, January 12th, 2012 AT 10:17 PM
Tiny
DEREK926
  • MEMBER
  • 6 POSTS
Michigan don't sniff any more, the bank 1 sensor is still intact, they cut about a foot behind it, the other code is the p0300, random/multi cyl mf detected, could the missing cat be the cause
Was this
answer
helpful?
Yes
No
Thursday, January 12th, 2012 AT 10:39 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
I don't know if the missing cat would cause that? I'd check for the system running rich. There should be a sensor after the cat. If that sensor is missing, it might cause some issues?
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 5:36 PM
Tiny
DEREK926
  • MEMBER
  • 6 POSTS
It still has all 3 sensors, how do you check for running rich?
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 8:25 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Use a gage and check fuel pressure. Not only check for correct pressure, see if pressure drops like a rock with everything off.
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 8:40 PM

Please login or register to post a reply.

Sponsored links