2000 GMC Jimmy

Tiny
GERALD CUMMINGS
  • MEMBER
  • 2000 GMC JIMMY
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 242,667 MILES
How to replace wiper blade assembly on a 2000 gmc jimmy?
Saturday, January 29th, 2011 AT 5:23 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
REMOVAL PROCEDURE

IMPORTANT: Replace the wiper blade element if it is removed from the wiper blade.

Remove the wiper blade from the wiper arm.
Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
Pull the wiper blade element (3) out through the wiper blade claws (2).

INSTALLATION PROCEDURE

IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.

Insert the open end of the wiper blade element (3) into the bottom claws of the wiper blade (2).
Guide the wiper blade element (3) through the wiper blade (1) claw sets.
Engage the bottom claw (2) of the wiper blade (1) into the notches in wiper blade element (3).
Install the wiper blade onto the wiper arm.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 1:43 AM

Please login or register to post a reply.

Related Wiper Blade Content

Wiper Blade Replacement GMC Yukon
VIDEO
Wiper Blade Replacement GMC Yukon
Instructional repair video
Wiper Blade Replacement
GUIDE
Wiper Blade Replacement
Replacing wipers blades is one of the easier services to perform which anyone can do using a small flat blade screwdriver or needle nose pliers.
VIEW MORE

Sponsored links