how to replace water pump on 2000 Daewoo Leganza
Feb 13, 2011 at 2:12 AM
2000 Daewoo Leganza
2000 DAEWOO LEGANZA
TARHEELS646
- MEMBER
- 1 POST
- FOLLOW
Advertisement
REMOVAL PROCEDURE
Drain the engine cooling system to a level below the thermostat housing. Refer to Coolant; Service and Repair.
Remove the timing belt.
Remove the timing belt tension roller retaining bolt.
Remove the timing belt tension roller.
Remove the coolant pump mounting bolts.
Remove the coolant pump from the engine block.
Remove the ring seal from the coolant pump.
Drain the engine cooling system to a level below the thermostat housing. Refer to Coolant; Service and Repair.
Remove the timing belt.
Remove the timing belt tension roller retaining bolt.
Remove the timing belt tension roller.
Remove the coolant pump mounting bolts.
Remove the coolant pump from the engine block.
Remove the ring seal from the coolant pump.
Images (Click to enlarge)
Feb 13, 2011 at 4:13 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.