SPONSORED LINKS

Fuel pump

Tiny
LODONNELL
  • MEMBER
  • 2000 CHEVROLET BLAZER
  • 155,000 MILES
Just replaced my fuel pump now my truck is running terrible was not running in this condition before replacing the pump check engine is on has no power and is staling
Monday, January 9th, 2012 AT 9:33 PM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Have the computer scanned for code/s-start here
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, January 9th, 2012 AT 9:49 PM
Tiny
JACKSPRAT
  • MEMBER
  • 46 POSTS
Why was the pump replaced in the first place? Recheck the work you have carried out. Make sure all lines are connected correctly and not kinked. Is the new pump the right one for your vehicle? If it was running correctly to begin with you could always refit the old pump? As for the check engine light you have to get it scanned for fault codes
Was this
answer
helpful?
Yes
No
Monday, January 9th, 2012 AT 9:49 PM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links