1999 Pontiac Grand Am Repair Question
Why wont my car start after changing head gaskets
Was all cam timing done correctly?Do you have spark?Have you checked compression?Actual fuel pressure is what?
I never took timing cover off so timing should be fine i have spark and i didn't do a pressure test but there is good pressure on the lines
Which engine do you have?Also have you checked for spark compression etc?
I have the 3.4 v6 and i have spark
Have you checked the compression yet?
No how do i check
You cant a compression tester at auto zone and then remove all you spark plugs.Then screw the compression tester into each cylinder then hold the gas pedal to the floor and crank the engine ten revolutions and record the number.before doing that pull the injector and ignition fuses.Also did you make sure there were no blown fuses?
Yes i checked all fuses all are good
Alright keep me posted.
I will and thank you