1999 Nissan Maxima Repair Question
Asked on August 24, 2012
Engine crank but want start?
Fuel pump run when turn switch on and gas is getting to the fuel rail but gas is not going through the fuel injector into the cylinder, i can spray some gas into the throttle body and the engine will start.
Asked by joe1953Answer
Replied on August 24, 2012
check injector pulse with a noid light, if no pulse you will proberbly have a faulty cam or crank angle sensor, a scan will normally show up any fault here.
Replied on August 24, 2012
i scan the computer it have a code #1320, po325, po304
Replied on August 24, 2012
where are the cam and crank angle sensor located,
Replied on August 25, 2012
i check injector pulse with a noid light the light will not blink, so why the noid light don't blink.