did a bonehead - i unhooked battery cable to reset brainbox - cleared code when doing so - any ideas
Aug 23, 2012 at 8:52 PM
Advertisement
HMAC300
CAR REPAIR CONTRIBUTOR
48,601 POSTS
sohook it back up and drive it see if it sets another code. But check your fuel pressure first as that can cause a miss as well as broken/soft vacuum lines. if the vehicle will start of course.
Aug 23, 2012 at 9:02 PM
EWW4948
MEMBER
3 POSTS
have been driving it daily - still running rough but no codes yet - havent found a bad vacuum yet - and what should fuel pressure read - psi?
Aug 23, 2012 at 11:46 PM
HMAC300
CAR REPAIR CONTRIBUTOR
48,601 POSTS
what engine and what kind of truck?
Aug 23, 2012 at 11:57 PM
EWW4948
MEMBER
3 POSTS
5.9 - 1999 dodge 1500 sport
Aug 24, 2012 at 2:54 AM
HMAC300
CAR REPAIR CONTRIBUTOR
48,601 POSTS
44-54psi with engine idling and .5 pint in 7 seconds
Aug 24, 2012 at 2:01 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.