CHRYSLER CIRRUS ENGINE PROBLEM
1999 Chrysler Cirrus • 150,000 miles
I have a 99 cirrus with a 2.5L. It loses power on accelerarion and the check engine light has flashed on and off s couple of times but is now off. I may have an exhaust leak that I'm investigating. Im trying to check the fault codes. Is it possible to get the engine fault codes without a OBDII scanner? I've tried the on-off-on-off-on key sequence but no luck. I've also tried turning it on and off in various combinations while the car is in neutral with the p-brake on but no luck. Anyone know a trick for obtaining the fault codes? Thanks.
March 29, 2013.
March 29, 2013.
1986 Nissan Stanza, California version. The engine wants to die when stopping. I thought that the lock-up switch for the torque converter was not unlocking. I have installed a used ...
2 answers • 1986 Nissan Sunny • 100,000 miles
1999 Hyundai Elantra mileage: 110,000. This car idles fairly well in neutral or park but very rough in reverse and drive. I just replaced the engine with a used engine and it is doing ...
1 answer • 1999 Hyundai Elantra • 110,000 miles
1988 Chevrolet Astro Van mileage: 247,000. It's time to replace the engine in my 1988 Astro. I bought a 4.3 V6 that has come out of a 1991 S-10. When I dismantled it to get it ready to ...
1 answer • 1988 Chevrolet Astro • 247,000 miles
1990 Toyota Camry mileage: 150,000. 1. The oil warning light is on. 2. There are four quarts of oil in the car. 3. The oil filter is dry. 4. The engine sounds rough. 5. There is noise ...
2 answers • 1990 Toyota Camry • 150,000 miles