Why won't my car start?

Tiny
YOUTUTU
  • MEMBER
  • 1999 CHRYSLER 300
I have a '99 Chevy Blazer with a 4.3 liter engine. I was driving down the street last Saturday night and the car stalled. I went to go start it, and it wouldn't turn over. At first I thought it'd be the alternator because this has happened before with the same results. But the battery was fine, I even replaced it to make sure. I replaced the ignition module, and the coils and it still won't start, it just cranks. I checked all of the fuses and everything is fine. The weird thing is my dad brought home one of those cheapy OBD II handheld scanner things, and it doesn't work. I tried it on my Mom's car and my Dad's car and for both of them, as soon as I plug it in and turn the key, the scanner screen lights up. In my car it's almost as if there's no power going to that certain plug, but everything else seems to work, the windows, locks, radio, ect. Any help would be greatly appreciated as I am at a standstill here and do not want to go to a mechanic and pay a ridiculous amount for it.
Tuesday, May 8th, 2012 AT 10:04 AM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Refer to this walk thru link for more information: https://www.2carpros.com/articles/car-cranks-but-wont-start
Was this
answer
helpful?
Yes
No
Tuesday, May 8th, 2012 AT 10:47 AM
Tiny
ANGELASA
  • MEMBER
  • 2 POSTS
First thing to check is turn your key on and look for a amber light that say check engine. Make sure that light come on and go out after about 3 to 15 sec with the key in on position. If you don't have the light on the most likely your car computer do not get power recheck the fuses and fusible link.
If you have the light on then listen to the fuel pump running when you turn the car on, it should run for about 3 sec. And turn off. If you don't hear the sound of the fuel pump then it would be your fuel pump or relay.
Was this
answer
helpful?
Yes
No
Wednesday, May 9th, 2012 AT 2:44 AM

Please login or register to post a reply.

Sponsored links