SPONSORED LINKS

I have replaced CV-axle and wheel bearings

Tiny
JOSEPHDMORRIS
  • MEMBER
  • 1998 TOYOTA RAV4
I have a 98 toyota rav4 that is making a popping/knocking noise only while braking. I have replaced the cv-axle and wheel bearings and I still get the same noise. What would you recommend?
Wednesday, November 30th, 2011 AT 12:06 AM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,164 POSTS
Have you checked for a cracked rotor? Does this vehicle have rear disc brakes? If so, check to make sure the park brake shoes are not damaged.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, November 30th, 2011 AT 12:08 AM
Tiny
JOSEPHDMORRIS
  • MEMBER
  • 3 POSTS
No crack on rotor. Has rear drum brakes. Would worn out guide pins cause this?
Was this
answer
helpful?
Yes
No
Wednesday, November 30th, 2011 AT 12:37 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,164 POSTS
The could. Check to make sure the springs are good on the rear brakes too
Was this
answer
helpful?
Yes
No
Wednesday, November 30th, 2011 AT 1:05 AM

Please login or register to post a reply.

Related Wheel Bearing Replace/Remove Content

Wheel Bearing Replacement
VIDEO
Wheel Bearing Replacement
Instructional repair video
CV Axle Bearing Press
GUIDE
CV Axle Bearing Press
This guide will show you how to use a hydraulic press to install an axle bearing into a spindle which holds a CV axle on either the front or rear of your vehicle. We are a...
VIEW MORE

Sponsored links