Why do the turn signals not work in my 98 Saturn SC2 but the hazards do?

RICKMAEE

MEMBER
1998 SATURN SC2
120,000 MILES

I was changing the back right turn signal but when I got the light cover off the bulb wasn't burnt out. I was replacing the bulb anyways when all of a sudden all the blinkers stopped working. The tail, break, and head lights work. But the blinkers don't. I checked all the fuses and they all seem to be working properly

4 Replies

JACOBANDNICKOLAS

MECHANIC
108,170 POSTS

Check to make sure the socket isn't damaged and check the wiring to it to confirm nothing has been damaged.

Was this

answer

helpful?

Yes

No

Monday, October 31st, 2011 AT 5:44 PM

SATURNTECH9

MECHANIC
30,870 POSTS

Just to add to this one why did you change the bulb?The turn signals worked before the bulb change?What is the bulb nunber of the bulb you put in?

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

+1

Monday, October 31st, 2011 AT 7:35 PM

RICKMAEE

MEMBER
2 POSTS

I changed it bc the front right blinker was blinking really fast, I just assumed it was the bulb. When I got the back light cover off and realized it wasn't the bulb, I thought I might as well put the new one in (the number is 1156 I think?) But when I put the new bulb in, the front blinker was still blinking really fast. If I figited with it it would come on but never stay on. I was about to try holding it in place with electrical tape when all the blinkers stopped working (it doesn't even click). But the hazards do work (except for the back right blinker which still doesn't work)

Was this

answer

helpful?

Yes

No

Tuesday, November 1st, 2011 AT 2:17 PM

SATURNTECH9

MECHANIC
30,870 POSTS

Sounds like you have a bad turn signal socket also sounds like you blew the turn signal fuse in the inside fuse box. Did you check the turn signal fuse in the inside fuse box?

Was this

answer

helpful?

Yes

No

-1

Wednesday, November 2nd, 2011 AT 9:35 PM