SPONSORED LINKS

Car wont shift

Tiny
BBARBO9
  • MEMBER
  • 1998 SATURN SC2
  • 230 MILES
Will not go in gear when car is on when it is off it goes in gear. The clutch has pressure. If the wheels are jacked up or the axle is loose it will go in to gear and turn. Everything as been replaced. Help
Monday, May 21st, 2012 AT 12:18 AM

3 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Sounds like a failed pressure plate in the clutch.

When you say everything, does that include the slave and master for the clutch?

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, May 21st, 2012 AT 12:24 AM
Tiny
DJCL
  • MECHANIC
  • 767 POSTS
Have you tried back bleeding the slave master
Was this
answer
helpful?
Yes
No
Monday, May 21st, 2012 AT 12:31 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
The clutch master/slave cylinder assemblies wernt ment to be bleed on those cars there a sealed system. When they leak loose fluid pressure etc you just replace the clutch master/slave as a sealed assembly.
Was this
answer
helpful?
Yes
No
Monday, May 21st, 2012 AT 4:12 AM

Please login or register to post a reply.

Related Differential Axle Replace/Remove Content

Sponsored links