BANK 1 SENSOR 1 WHICH SIDE OF THE MOTOR DOES THIS REFERENCE TO?
1998 Mazda b4000 • 77,000 miles
I have replaced the o2 sensor on the drivers side of the exhaust. Have I replaced the wrong sensor? I am willing to attempt to replace the o2 sensor on the passenger side if this will correct the problem. I get a code reading of "slow response" even tho I replaced the drivers side o2 sensor.
Hi hope you can help, this is a general question. 2 wire sensors, crank and cam are referred to as inductive, magnetic, whilst 3 wire sensors are Hall effect. Can a inductive, magnetic ...
3 answers • 2010 All Other Makes All Other Models
2007 toyota camry 140k. Check engine light code Knock sensor. Reset and came back on right away. What could cause this other than the obviouse bad sensor or wire?
9 answers • 2007 Toyota Camry • 140 miles
I had a rough starting when cold issue. Checked the codes and discovered two codes for a lean condition in both banks. After not finding a vac leak, I replaced the MAF with a ...
2 answers • 2002 Chevrolet Silverado • 170,779 miles
Describe the type sensor of the Knock sensor is on this vehicle and how it should be tested.?
1 answer • 2002 Chrysler 300 • 100 miles