all codes are an indication of failures in systems. they all need to be checked by a shop for failures. identifying failures from code numbers never works without proper diagnostics. get a shop to check these for you to insure a safe trouble free trip.

Roy

Answered by ASEMaster6371 (expert)
24,973 answers provided

P1381 –CYP intermittent interruption.
This is the code that can result in engine nonstarting and performance issues. It could be a loose or contaminated wire connector at the sensor. Highest priority on list you should be checking.

P1457 – Leak Detected In EVAP Control System. Not likely to cause any problelm other that emission. Could be due to a loose fuel cap.

P1738 - 2nd clutch pressure switch. Likely to cause shifting problem. Not to be taken lightly as it can result in transmission failure.

Answered by KHLow2008 (expert)
40,318 answers provided

Thanks you guys! Both of your information provided was very helpful.

Response from raye1981
1 question asked

You're welcome.

Answered by KHLow2008 (expert)
40,318 answers provided