SPONSORED LINKS

Check engine light is on with two codes, P1738 and P1361 for 98 Accord LX

Tiny
HEMALPATEL
  • MEMBER
  • 1998 HONDA ACCORD
  • 155,000 MILES
@3000 rpm it jerks, will not rev over 3000 rpm. These two codes came up after I had a leak from the bottom of the transmition that was just fixed and timing beld replaced.
Wednesday, October 3rd, 2012 AT 5:09 PM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
When trouble codes are triggerred, they can result in limp mode whereby you would not be able to rev above 3000 rpm. Getting the problem resolved would this.

P1361 is a fault with the crank sensor. Check the connector for contaminations, presence of water or improper connection.

P1738 is a fault with the A/T clutch pressure control solenoid "A" and this would affect gear shifting. Check the wire connections
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 3rd, 2012 AT 5:47 PM
Tiny
HEMALPATEL
  • MEMBER
  • 2 POSTS
Would you happen to have a diagram of the location for the solenoid "A" for this accord?
Was this
answer
helpful?
Yes
No
+1
Friday, October 5th, 2012 AT 6:45 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
I do not know which engine you have so I have included both. Solenoid A and B comes as an assembly and quite often it is an electrical fault that causes this.
Images (Click to make bigger)
Thumb
Thumb
Was this
answer
helpful?
Yes
No
+1
Friday, October 5th, 2012 AT 8:43 PM

Please login or register to post a reply.

Related Check Engine Light Content

Code Read Retrieval/Clear Honda
VIDEO
Code Read Retrieval/Clear Honda
Instructional repair video
Check Engine Light
GUIDE
Check Engine Light
Why is my check engine or service engine soon turned on? In this guide we talk about what this is associated with this notorious light, what it is used for and what you...
VIEW MORE

Sponsored links